privdayz.com speacial mini anti bypass shell

Linux centos-s-1vcpu-2gb-sgp1-01 3.10.0-1160.108.1.el7.x86_64 #1 SMP Thu Jan 25 16:17:31 UTC 2024 x86_64
nginx/1.26.1
167.99.78.96

File Name : ifdown-ipv6

#!/bin/sh
#
# ifdown-ipv6
#
#
# Taken from:
# (P) & (C) 2000-2004 by Peter Bieringer <pb@bieringer.de>
#
#  You will find more information on the initscripts-ipv6 homepage at
#   http://www.deepspace6.net/projects/initscripts-ipv6.html
#
# RHL integration assistance by Pekka Savola <pekkas@netcore.fi>
#
# Version 2005-09-22
#
# Note: if called as (like normally) by /etc/sysconfig/network-scripts/ifdown
#        exit codes aren't handled by "ifdown"
#
# Uses following information from /etc/sysconfig/network-scripts/ifcfg-$1:
#  DEVICE=<device>
#  IPV6INIT=yes|no: controls IPv6 configuration for this interface
#
# Optional for 6to4 tunneling:
#  IPV6TO4_RELAY=<IPv4 address>: IPv4 address of the remote 6to4 relay [default: 192.88.99.1]
#  IPV6TO4_ROUTING="<device>-<suffix>/<prefix length> ...": information to setup internal interfaces
#
# Optional for 6to4 tunneling links to trigger radvd:
#  IPV6_CONTROL_RADVD=yes|no: controls radvd triggering [optional]
#  IPV6_RADVD_PIDFILE=<file>: PID file of radvd for sending signals, default is "/var/run/radvd/radvd.pid" [optional]
#  IPV6_RADVD_TRIGGER_ACTION=startstop|reload|restart|SIGHUP: how to trigger radvd [optional, default is SIGHUP]
#
#  Required version of radvd to use 6to4 prefix recalculation
#   0.6.2p3 or newer supporting option "Base6to4Interface"
#  Required version of radvd to use dynamic ppp links
#   0.7.0 + fixes or newer
#

. /etc/sysconfig/network

cd /etc/sysconfig/network-scripts
. ./network-functions

CONFIG=$1
[ -f "$CONFIG" ] || CONFIG=ifcfg-$CONFIG
source_config

REALDEVICE=${DEVICE%%:*}
DEVICE=$REALDEVICE

[ -f /etc/sysconfig/network-scripts/network-functions-ipv6 ] || exit 1
. /etc/sysconfig/network-scripts/network-functions-ipv6

# IPv6 test, no module loaded, exit if system is not IPv6-ready
ipv6_test testonly || exit 0

# Test device status
ipv6_test_device_status $DEVICE
if [ $? != 0 -a $? != 11 ]; then
    # device doesn't exist or other problem occurs
    exit 1
fi

if [ ! "$IPV6_SET_SYSCTLS" = "no" ]; then
    # Switch some sysctls to secure mode
    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.forwarding=0 >/dev/null 2>&1
    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_ra=0 >/dev/null 2>&1
    /sbin/sysctl -e -w net.ipv6.conf.$SYSCTLDEVICE.accept_redirects=0 >/dev/null 2>&1
fi
/sbin/ip link set $DEVICE addrgenmode eui64 >/dev/null 2>&1

# Test status of tun6to4 device
ipv6_test_device_status tun6to4
if [ $? = 0 -o $? = 11 ]; then
    # Device exists
    valid6to4config="yes"

if [ -z "$IPV6TO4_RELAY" ]; then
        IPV6TO4_RELAY="192.88.99.1"
    fi

# Get IPv4 address from interface
    if [ -n "$IPV6TO4_IPV4ADDR" ]; then
        # Take special configured from config file (precedence 1)
        ipv4addr="$IPV6TO4_IPV4ADDR"

# Get IPv4 address from interface first
        ipv4addrlocal="$(ipv6_get_ipv4addr_of_device $DEVICE)"
        if [ -z "$ipv4addrlocal" ]; then
            # Take configured from config file
            ipv4addrlocal="$IPADDR"
        fi
    else
        # Get IPv4 address from interface first (has precedence 2)
        ipv4addr="$(ipv6_get_ipv4addr_of_device $DEVICE)"
        if [ -z "$ipv4addr" ]; then
            # Take configured from config file (precedence 3)
            ipv4addr="$IPADDR"
        fi
        ipv4addrlocal="$ipv4addr"
    fi

# Get local IPv4 address of dedicated tunnel
    ipv4addr6to4local="$(ipv6_get_ipv4addr_of_tunnel tun6to4 local)"

if [ -z "$ipv4addrlocal" -o -z "$ipv4addr6to4local" ]; then
        # no IPv4 addresses given, 6to4 sure not configured
        valid6to4config="no"
    else
        # Check against configured 6to4 tunnel to see if this interface was
        # used before
        if [ "$ipv4addrlocal" != "$ipv4addr6to4local" ]; then
            # IPv4 address of interface does't match local tunnel address,
            # interface was not used for current 6to4 setup
            valid6to4config="no"
        fi
    fi
fi

# Shutdown of 6to4, if configured
if [ "$valid6to4config" = "yes" ]; then
    if [ -n "$IPV6TO4_ROUTING" ]; then
        # Delete routes to local networks
        for devsuf in $IPV6TO4_ROUTING; do
            dev="${devsuf%%-*}"
            ipv6_cleanup_6to4_device $dev
        done
    fi

# Delete all configured 6to4 address
    ipv6_cleanup_6to4_tunnels tun6to4

# Control running radvd
    ipv6_trigger_radvd down "$IPV6_RADVD_TRIGGER_ACTION" $IPV6_RADVD_PIDFILE
fi

# Delete all current configured IPv6 addresses on this interface
ipv6_cleanup_device $DEVICE

System Information
*ReClick For Close
File : privdayz.com /index.php

Name	Type	Size	Owner/Group	Permission	Last Modified	Actions
.	dir	-	root/root	0755	2023-02-17 04:04:30
..	dir	-	root/root	0755	2025-12-15 06:05:26
ifcfg-eth0	text/plain	297 B	root/root	0644	2023-02-17 04:04:30
ifcfg-eth1	text/plain	221 B	root/root	0644	2023-02-17 04:04:30
ifcfg-lo	text/plain	254 B	root/root	0644	2022-04-18 09:29:39
ifdown	text/x-shellscript	1.61 KB	root/root	0755	2020-05-22 10:44:33
ifdown-Team	text/x-shellscript	1.58 KB	root/root	0755	2018-12-09 08:57:18
ifdown-TeamPort	text/x-shellscript	1.52 KB	root/root	0755	2018-12-09 08:57:18
ifdown-bnep	text/x-shellscript	654 B	root/root	0755	2020-05-22 10:44:33
ifdown-eth	text/x-shellscript	6.38 KB	root/root	0755	2020-05-22 10:44:33
ifdown-ippp	text/x-shellscript	781 B	root/root	0755	2020-05-22 10:44:33
ifdown-ipv6	text/x-shellscript	4.43 KB	root/root	0755	2020-05-22 10:44:33
ifdown-isdn	text/x-shellscript	781 B	root/root	0755	2020-05-22 10:44:33
ifdown-post	text/x-shellscript	2.08 KB	root/root	0755	2020-05-22 10:44:33
ifdown-ppp	text/x-shellscript	1.04 KB	root/root	0755	2020-05-22 10:44:33
ifdown-routes	text/x-shellscript	870 B	root/root	0755	2020-05-22 10:44:33
ifdown-sit	text/x-shellscript	1.42 KB	root/root	0755	2020-05-22 10:44:33
ifdown-tunnel	text/x-shellscript	1.43 KB	root/root	0755	2020-05-22 10:44:33
ifup	text/x-shellscript	4.89 KB	root/root	0755	2020-05-22 10:44:33
ifup-Team	text/x-shellscript	1.71 KB	root/root	0755	2018-12-09 08:57:18
ifup-TeamPort	text/x-shellscript	1.83 KB	root/root	0755	2018-12-09 08:57:18
ifup-aliases	text/x-shellscript	12.12 KB	root/root	0755	2020-05-22 10:44:33
ifup-bnep	text/x-shellscript	910 B	root/root	0755	2020-05-22 10:44:33
ifup-eth	text/x-shellscript	13.44 KB	root/root	0755	2020-05-22 10:44:33
ifup-ippp	text/x-shellscript	11.79 KB	root/root	0755	2020-05-22 10:44:33
ifup-ipv6	text/x-shellscript	11.61 KB	root/root	0755	2020-05-22 10:44:33
ifup-isdn	text/x-shellscript	11.79 KB	root/root	0755	2020-05-22 10:44:33
ifup-plip	text/x-shellscript	650 B	root/root	0755	2020-05-22 10:44:33
ifup-plusb	text/x-shellscript	1.04 KB	root/root	0755	2020-05-22 10:44:33
ifup-post	text/x-shellscript	4.88 KB	root/root	0755	2020-05-22 10:44:33
ifup-ppp	text/x-shellscript	4.06 KB	root/root	0755	2020-05-22 10:44:33
ifup-routes	text/x-shellscript	1.95 KB	root/root	0755	2020-05-22 10:44:33
ifup-sit	text/x-shellscript	3.23 KB	root/root	0755	2020-05-22 10:44:33
ifup-tunnel	text/x-shellscript	2.71 KB	root/root	0755	2020-05-22 10:44:33
ifup-wireless	text/x-shellscript	1.79 KB	root/root	0755	2020-05-22 10:44:33
init.ipv6-global	text/x-shellscript	5.29 KB	root/root	0755	2020-05-22 10:44:33
network-functions	text/plain	20.19 KB	root/root	0644	2020-05-22 10:44:33
network-functions-ipv6	text/plain	30.26 KB	root/root	0644	2020-05-22 10:44:33